Previously, our company's website introduced the choice of cutting oil used in Precision machining, because cutting oil is very important during processing. Now that we know the cutting oil for Precision machining Lets take a look at another topic, which is a new bionic cutting oil recently on the market. Today we will introduce the difference between bionic cutting oil and ordinary cutting oil:
1. More durable: The design principle of bionic cutting oil mainly participates in the self-regulation and self-repairing of biological, facing the increasingly complex The machining environment can show more stable performance than the original ordinary cutting fluid, and the service life is longer.
2. More safe and reliable: Traditional cutting oils often face the problem of deterioration caused by bacterial reproduction. If too little fungicide is added to control the bacteria, the cutting oil will smell and rancid, especially when the weather is hot; If too much fungicide is added, it will often cause the pungent smell of cutting oil, which will harm the workers. Bionic cutting oil participates in the biological immune system. The designed antibacterial system can change with the increase or decrease of bacteria. When the bacteria increase, it can effectively produce antibacterial tissue to prevent the cutting oil from deteriorating. When bacteria are reduced, it will not cause discomfort to workers because of a large amount of antibacterial substances.
3. Lower cost of use: As we all know, traditional cutting oil will take away many active ingredients due to heat generation or work piece adhesion during use. We have mentioned this in the company news before, and the biomimetic cutting oil uses the biological regeneration function. Even if the water level drops, the active ingredients will remain in the solution more than the traditional cutting oil. Only a small amount of the original liquid needs to be added. And the solution can be supplemented with water. The overall usage is more economical than the previous usage. In fact, the one year we say, more durable is actually a point of reducing costs.
4. Cooling, more plot-oriented: In fact, everyone also guides, the ultimate meaning of cutting oil for machining is the cooling effect when machining the workpiece, and traditional cutting oil (especially oil-based cutting oil) is often finished After the whole workpiece is very dirty, cleaning is very inconvenient. The biomimetic cutting oil uses the advantages of biological superior environmental selection characteristics, and designs the selective "chemical adsorption" function, which can produce microscopic chemical adsorption on the processing point, and form a microscopic polymer film on the tool and the surface of the processing point. This polymer film can effectively provide lubrication and cooling, and at the same time will not form a very difficult to clean oil film in the non-processing area, so this selective adsorption not only meets the lubrication and cooling required for processing, but also meets the convenience of subsequent cleaning Requirements, on the one hand greatly improve the efficiency, on the other hand can reduce the scrap rate of the workpiece.
5. More environmental protection: In fact, our country has proposed production-oriented enterprises long ago, to pay attention to environmental protection, but there are not many companies that do this. After the traditional cutting oil has been used for a long time, many impurities will be mixed into it, such as the waste oil of the machine tool, the waste of various solids, the deposition of impurities in the water, etc., which will eventually become a "paste", which will seriously affect the quality of the cutting oil , And later cleaning is very troublesome. The bionic cutting oil uses biological self-purification function, which can "classify" different impurities, solid impurities can settle down to the lower layer, oily substances can be precipitated to the upper layer, to ensure the stability of the solution, and environmental protection in the later period During the treatment, the settling substance can be removed simply and effectively, which is simple and clean.

Such a cutting oil can reduce the cost, and it can call for environmental protection in the corresponding country. The key is that the damage to the workers is very small, so the Quality parts company also bought bionics in the first time Cutting oil processes all parts.
This article Address:https://www.professionalmanufacturing.com/shownews.asp?id=112